11
Copyright 2019 Iron Bow Technologies
Assemble MEDVIEW-BRKT400-A01 to a Monitor
1.
Follow the previous instructions for
attacheing the MedView to the MEDVIEW-BRKT100-A01
2.
Place the monitor face down on a table being sure to protect the front face from scratches or
damage.
3.
Position the MedView/MEDVIEW-BRKT100-A01 assembly over the monitor.
4.
Locate the MEDVIEW-BRKT200 bracket so the 200x200 hole
pattern is centered on the monitor. The counterbore
pockets must be facing away from the BRKT100 bracket.
5.
Align the slots in the bracket with one of the set of (3) 10-32
threaded holes in the BRKT100 bracket.
6.
Secure the BRKT200 to the BRKT100 plate using the (3) 10-32
x 5/16 phillips pan head screws and (3) #10 washers.
7.
Attach the (2) MEDVIEW-BRKT400-A01 bracket arms to the
BRKT200 bracket using the (4) 10-32 x 5/16 flathead screws.
8.
Secure the bracket assembly to the monitor using M6 or M8
pan head screws. With spacers, use 25mm long screws, and
16mm without spacers.
Figure 6 - Counterbore hole detail view
Figure 7 - Add bracket for 400 x 400 mount
