Copyright 2018 Iron Bow Technologies
16
Enabling and Disabling Audio Privacy Listening Mode
Audio from the remote participant always plays through both the integrated speakers and
the headphone output. Enabling Audio Privacy Mode mutes the integrated speakers so
that audio plays only through the headphone output for private listening. The headphone
audio output is shown in
Figure 5
.
To enable Audio Privacy Listening Mode:
Press
on the integrated control panel. The associated LED will light when
this mode is enabled.
To disable Audio Privacy Listening Mode:
Press again
on the integrated control panel. The associated LED will turn off.
Enabling and Disabling Stethoscope Mode
The Stethoscope Mode optimizes audio transmission of the stethoscope signal connected
to the stethoscope audio input, while automatically muting the microphone to minimize
audio interference. The stethoscope audio input is shown in
Figure 5
.
To enable Stethoscope Mode:
Press
on the integrated control panel. The associated LED will light when
this mode is enabled.
To disable Stethoscope Mode:
Press again
on the integrated control panel. The associated LED will turn off.
Adjusting Transmission Audio Gain
You can adjust the gain of the audio signal transmitted from the codec to optimize the
audio experience at the remote end (see
CLINiC Administration
).
