Iron Baltic 86.1000, Инструкция по безопасности и эксплуатации

Страница: 38 / 44

38
Samm 5 Paigaldage rulliku hoidik (Pos.5). Kinnitamiseks kasutage M12x120 polti (Pos.26),
Ø12 mm seibe (Pos.29) ja M12 nyloc mutrit (Pos.32). Pingutage polt selliselt, et
rulliku hoidik saaks vabalt liikuda.
Step 5 Install pulley holder (Pos.5). For fastening use M12x120 bolt (Pos.26), Ø12 mm
washers (Pos.29) and M12 nyloc nuts (Pos.32). Tighten the bolt so that the pulley
holder moves freely.
5
26 29 29 32
Samm 6 Paigaldage rullik (Pos.13). Kinnitamiseks kasutage M12x50 polti (Pos.24), Ø12 mm
seibe (Pos.29) ja M12 nyloc mutrit (Pos.32). Pingutage polt selliselt, et rullik saaks
vabalt pöörelda.
Step 6 Install pulley (Pos.13). For fastening use M12x50 bolt (Pos.24), Ø12 mm washers
(Pos.29) and M12 nyloc nut (Pos.32). Tighten the bolt so that the pulley can rotate
freely.
24 29 29 32
13
Samm 7
Paigaldage rulliku hoidik / vintsi alumine kate (Pos.14) koos vintsiga (lisavarustus)
ning rullik (Pos.13). Hoidiku kinnitamiseks kasutage M8x25 polte (Pos.21) ja Ø8 mm
seibe (Pos.27). Rullik kinnitage tapiga (Pos.16).
Step 7 Install pulley holder (Pos.14) together with winch (optional accessory) and the pulley
(Pos.13). Use M8x25 bolts (Pos.21) and Ø8 mm washers (Pos.27) to fasten the holder
and fasten the pulley with a pin (Pos.16).
14
21 27
13
16
19