3
. Carefully stand the rail assembly in an
upright, vertical position.
Make sure the rail assembly is standing on
a flat, level area. If necessary, have a
helper steady the rail to prevent it from tip-
ping over. The rail assembly weighs
approximately 300 pounds and will cause
bodily injury if it falls on someone.
4
. Carefully align the hinge brackets in the
base unit with the holes in the rail assem-
bly.
Have someone hold the rail assem-
bly to prevent it from falling during
this part of the assembly.
5
. Bolt the base unit to the rail assembly
using two 1/2-13 x 1-1/2 inch long hex
head bolts, lockwashers, and nuts, as
shown. Hand tighten the nuts.
WARNING
Assembly Procedure
Some components are very heavy
and can be damaged if mishan-
dled. Also, to help prevent per-
sonal injury, it is strongly recom-
mended that two (2) people work
together to uncrate and assemble
the log splitter.
1
.
Remove and read all instructions and
safety recommendations before
assembling or operating this log split-
ter.
2
. Before removing the base unit from the
pallet, remove the tongue and front leg
assembly and install it to the base unit
using four 1/2-13 x 1-1/2 inch long hex
head bolts, lockwashers, and nuts. Tight-
en the nuts securely. Roll the tongue/base
unit off the pallet. Lower the front leg and
lock it into position.
CAUTION
Iron & Oak
12
815-672-8596
815-672-8596
13
Iron & Oak
Assembly Instructions
Assembly Instructions
