❏
❏
Read all assembly, operating, and safety instructions.
❏
❏
Complete and return the warranty card to register your log split-
ter.
❏
❏
Write the serial number and date-of-purchase in this manual.
❏
❏
Assemble the log splitter.
❏
❏
Make sure the oil filter is properly installed. (See “Assembly
Procedure” section.)
❏
❏
Fill the hydraulic tank with the recommended type and quantity
of oil. (See “Start-Up Procedure” section.)
❏
❏
Fill the engine crankcase with the manufacturer’s recommend-
ed type and quantity of oil. (See “Start-Up Procedure” section.)
❏
❏
Fill the engine fuel tank with fresh, clean,
lead-free
gasoline.
(Do not mix oil with gasoline.)
❏
❏
Bleed the air out of the cylinder before starting the log splitter.
(See “Start-Up Procedure” section.)
❏
❏
Make sure the trailer hitch of the towing vehicle is equipped with
a 2 inch ball.
815-672-8596
1
Iron & Oak
Serial Number ______________
Date-of-Purchase ___________
Please enter the serial number and purchase
date of your log splitter in the space provided.
Keep this manual for future reference.
NOTE:
Iron and Oak Commercial Products reserves the right to make technical
changes for product improvement. This manual may contain illustrations
and photographs, for demonstration purposes, which slightly deviate from the
actual product design.
Initial Start-Up Instructions