iRobot Looj, Руководство пользователя

Страница: 8 / 24

8
iRobot Looj Owner’s Manual
Charging and Installing the Battery
Before you use Looj, charge the
included 7.2V battery for 15 hours.
Partially used and fully used batteries
should also be charged for 15 hours.
Do not leave Looj’s battery plugged into
the charger for more than several days,
as it may reduce the battery life.
Looj batteries are designed to power
Looj through 150 linear feet of gutter
on a single charge, including the time
to drive Looj back and forth during
cleaning.
For long term storage, remove the battery
from the robot, fully charge the battery
and store it in a cool, dry place.
To install battery:
1. Depress the tab on the left side of the
battery compartment. Open the door.
2. Connect the battery cord inside the
robot’s battery compartment.
3. Slide the battery into the battery
compartment, wireless end first. Tuck
extra wire into battery compartment.
The wire cord will fit on the right side.
4. If used, wipe battery compartment door clean to ensure a
proper seal.
5. Close door until it clicks.