IRiver Astell&Kern AK10, Инструкция по эксплуатации

Страница: 5 / 10

Charging LED
Product status LED status LED color
Disconnect USB
Charging
Charging complete
LED is off when USB
is disconnected.
LED blinks intermittently
while product is charging.
LED remains on once
charging is complete.
Green
Green
Green
Getting started
07
User Guide
Use only the AK10 USB cable provided
with the product to ensure safe operation.
Check that it is connected to a high-power
USB 2.0 port.
Connecting to a low-power USB port
(some keyboards, USB hubs without their
own power supply, etc.), may prevent
normal charging.
Once the computer goes into standby
mode, the iriver device may not be
charged. The charging time is about 3
hours and 30 minutes. (Fully discharged)
Charge the product while it is turned off.
When charging during operation, the full
charge display may not be shown.
Using the product during charging may
require additional time for a full charge or
the battery may not fully recharge.
Charge and keep the product at room
temperature.
Exposure to excessive heat or cold may
adversely affect charging performance.
Battery performance may decline with age
and number of recharges.
Charging
1. Turn on the computer.
2. Using a AK10 USB cable to connect
the product to the computer automatically
recharges the built-in battery.
06
Getting started