IPU 40151 Issue 1
9 of 16
Full screen.
Cursor one.
Cursor two.
Hotkey 3,
In save mode, press the centre button once to freeze an image and a second time to save the image as an
image.snp
file to the SD card. The file saving takes a few seconds and the file name is given a
sequential number. In load mode, use up and down arrows to cycle through stored snapshots. Use left
and right arrows to cycle though 10 snapshots at a time.
NOTE:
The imager files must retain their file name (iri_1020XXXX.snp), if they are renamed on the
PC they will no longer be readable by the imager.
Loading.
Saving.
No SD card.
No Files Saved.
Hotkey 4,
This button toggles between auto and manual mode. In auto mode, the imager continually adjusts the
level and span to achieve the optimum image. In manual mode it is possible to manually control the
level and span to produce an image to your requirements. Please see the icons below as they will
appear on the imager display.
3.0 Image Adjustment
In manual mode, use the Up and Down directional buttons to change Level, and Left and Right buttons
to change Span. Manual Level and Span Settings icons will appear on the imager display.
Level Up Level Down Maximum Level Minimum Level.
Span In Span out Maximum Span Minimum Span
4.0 User settings.
User settings – For the convenience of the user, many settings are persistent, the settings and values are
remembered when the IRI 1020 is switched off.
.
Auto Level & Span
.Manual Level & Span
