IPU 40151 Issue 1
11 of 16
7.0 Installing Software on PC.
The PC should be IBM compatible running Microsoft Windows 2000, XP or Vista with a USB port and
24 bit colour graphics. If a laptop PC is used, a TFT display is recommended.
The software is on the supplied CD-Rom.
1.
Insert the supplied CD-Rom into the PC’s CD-Drive (D:) or (E:)
2.
Double click on “My Computer” and then on the CD-Drive (D:) or (E:)
3.
Double click on the PC Install folder.
4.
Double click on ‘1020 PC Setup.exe’.
5.
Follow the on screen prompts to complete the installation.
NOTE:
•
The IRISYS 1020 Imager software will by default be installed into the following path:
C:\Program Files\IRISYS\IRISYS 1000 Series Imager
•
The above path and name can be changed during the installation, but it is advisable to leave it as
the default. The installation will also put a ‘Shortcut Icon’ onto your PCs desktop to allow quick
and easy start-up of the software.
7.1 Operating IRI 1020 Imager Software.
.
Launch the IRISYS 1020 Imager program from the Desktop icon, or from:
START/PROGRAMS/IRISYS/IRISYS 1020 Series Imager
When launched, the window obtained will be similar to figure 13.
7.2 Using IRI 1020 Thermal Imager with a PC.
The Controls in the control panel, as seen in figure 13, are as follows
Sensitivity – see below for explanation.
Range – see below for explanation.
Resolution – sets the level of interpolation from 16 X 16 up to 128 X 128.
Colour map – sets the display in greyscale, red-blue or green-blue.
Orientation – the image can be rotated around to different orientations.
Ambient – set the ambient temperature.
Emissivity – select a value to suit the object under examination,
Temperature units – choose Celsius, Fahrenheit or Kelvin.
