7
Quick User Guide – IRIScan
TM
Pro 5
5. Preparing the Scanner
Connect the Scanner to a Power Outlet
Plug the small end of the power adaptor into the power jack of your scanner. Insert the other end into an
appropriate power outlet.
Note that the power adapter can be modified to European, American and Asian power outlets.
Connect the scanner to your computer as described in
2. Software Installation
.
Power on the Scanner
Press the Power button on the front panel. The Power button led now flashes. When it stops flashing and is
steadily on, the scanner is ready to scan.
To power off the scanner, press the Power button for 3 seconds.
6. Using the IRIScan Pro 5
The IRIScan Pro 5 can be used in several ways:
With the Button Manager to scan documents directly to Readiris for text recognition, scan them
to other applications of your choice, to multiple Cloud destinations, etc.
From within IRISmart File/Invoice, Readiris or Cardiris.
From within the Capture Tool.
In section
7. Scanning Documents
of this Quick User Guide we only describe the basics how to scan. For
more information on how to scan from within IRISmart File/Invoice, Readiris, Cardiris, the Button Manager
and the Capture Tool, see their separate User Guides. They can be found on the
Technical Support
section
of
www.irislink.com.
Important: when scanning from within Readiris and IRISmart File/Invoice, the Scanner Properties
window pops up before each scan. In this window you can configure advanced scan settings. These scan
settings are the same as the ones that are available in the Capture Tool. For detailed information about
the scan settings, see the separate Capture Tool User Guide on our website.
