7
CLEANING AND MAINTENANCE
Warning:
Cleaning and maintenance must be done after unplugging the vacuum.
Notice:
Please do not splash water on the vacuum body as this could cause damage.
Use a diluted neutral cleaning agent.
Use of strong cleaning agents such as amyl acetic ester, alcohol, oil, etc. can cause fading, deformation or breakdown.
Dust indicator
Dust Indicator:
Remove the dust cup and clean both sides of the sensors with a
cotton swab.
•
Please clean regularly to avoid dust buildup, causing sensor
to function poorly.
Vacuum Body:
Fully wring out a rag and use it to wipe down the body and any
remaining cleaner.
Collection Head:
•
Clean hair, string and other small objects from the dust
intake port using tweezers to prevent dust buildup and
decreased suction. Please clean it regularly.
•
Please clean dirt on the agitator with a brush.
•
Clean regularly to prevent dust buildup causing sensors to
function poorly.
Rollers
Agitator
Dust intake port
8
REPLACEABLE COMPONENTS
Please follow the instructions below for replacing the mesh dust filter, mesh exhaust filter, and battery.
2. Insert new dust filter.
•
Hold the filter cap with fingers.
•
Line up the latches, insert the new mesh filter, and
twist to lock into place.
•
Press the filter in the dust cup until it clicks into place.
Dust Filter Replacement
*Please see P6 “Clear Dust” for how to remove filter set.
1. Remove the dust filter.
•
Hold the filter cap with fingers.
•
Turn the dust mesh filter until latches no longer line up.
•
Remove the filter from the filter cap.
2. Change exhaust filter.
•
Remove filter and insert new filters.
*Side with a hole is placed facing inwards.
3. Replace filter cover.
•
Place filter cover back on the vacuum and turn it
clockwise to lock into place.
Exhaust Filter Mesh Replacement
1. Remove exhaust filter cover.
•
Turn the filter cover counterclockwise, and pull it off.
Mesh Filter
TURN
Filter Cap
REMOVE
open
close
open
close
Filter Cover
Side with a hole is
placed facing inwards.
replace
New Filter
open
close
open
close
Filter Cover
Filter Cover
Latch to line up
latch
latch
How to Store: When the product is not in use for an extended period of time, cover the unit with a plastic bag,
etc., and then store it in a dry location away from direct sunlight.