17
Common functions
Description
Function
Operating mode
selection.
Put the cabinet holder in Stand-by by pressing P3 .
Press P5 for 4 seconds .
The display shows the set operating mode.
Use P4 and P6 to set the desired operating mode
where:
POS = POSITIVE mode
NEG = NEGATIVE mode
CIOC = CHOCOLATE mode
Press P5 to confirm the data entered and exit the menu.
If no key is pressed, after a pre-set time
one automatically exits the menu and the entered data is saved.
Humidity control
(for POSITIVE
or CHOCOLATE
mode)
Press P1 for 4 seconds.
Use P4 and P6 to set the relative humidity level
desired, where:
Ur1= low humidity
Ur2= average humidity
Ur3= high humidity
Press P1 to confirm the data entered and exit the menu.
If no key is pressed, after a pre-set time
one automatically exits the menu and the entered data is saved.
Overcooling
Press P6 for 4 seconds to start up the Overcooling cycle.
Manual defrost
Press P2 for 4 seconds to start up the Manual defrost cycle.
Switching on
of cell light
Upon door opening, the light inside the cell is automatically switched on.
With the light off, press P1 to switch the light on inside the cell.
With the light on, press P1 to switch the light off inside the cell.
Key locking
To lock operation of the keys:
Press P3 + P4 simultaneously for 1 second.
The display shows "
Loc
" for 1 second.
To unlock operation of the keys:
Press P3 + P4 simultaneously for 1 second.
The display shows "
UnL
" for 1 second.
