Iridium Pilot TPIM1301, Руководство по установке

Страница: 46 / 70

5: APPENDICES
Iridium Pilot Land Station Installation Guide
41
Appendix D – Ground Cable
Figure 19.
3m ODU Ground Cable
B
GROUNDING CABLE 10mm² ACTIVE SECTION SEE TABLE FOR APPROVED CABLE LENGTH
11 BOTH ENDS
DETAIL B SCALE 1 : 2
CABLE PRODUCT LABEL
COPPER TIN PLATED, HEAVY DUTY COMPRESSION LUG #6GA (10mm²), FOR M10 STUD, BOTH ENDS
NOTES: 1. CABLE SPECIFICATIONS: - CABLE STOCK SHALL BE MARINE/OFFSHORE GRADE (UV STABILIZED/R
ESISTANT) CABLE - TO IEC60332-1-2
- CABLE SHALL HAVE COPPER STRANDED CONDUCTORS WITH 10mm² ACTI
VE SECTION AREA.
- CABLE TEMPERATURE RANGE FOR INSTALLATION AND OPERATION: -40
°C TO +85°C.
- CABLE SHALL BE CLOSED-END, CRIMP-TERMINATED FOR M10 STUD ON
BOTH ENDS, THE CRIMP CLOSED ENDED
TERMINATION SHALL SEAL THE CONDUCTOR FROM EXPOSURE TO WATER
.
2. THE CABLE SHALL HAVE TWO (2) PRODUCT LABELS ONE AT EACH END
ATTACHED TO THE CABLE BELOW THE
LUGS. THE PRODUCT LABEL SHALL BE COMPLIANT WITH OP-062. 3. PACKAGING FORM OF SUPPLIED CABLE TO BE: COILED, TIE-WRAPPED.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
Released for prototype.
5/31/2013
SM
B
Changed length, 3m was 12ft
7/29/2013
SM
C
Changed the label to mfg. part number & length
tolerance from 0.1m to 0.25m.
8/27/2013
SM
D
Added table, changed note 2.
10/04/2013
SM
APPROVED CABLE LENGTH
LENGTH
ITEM #
3m±0.25m
115-00026
m=meters
D E F C
1
2
3
4
B A
3
2
1
5
C D
4
6
7
8
A B
5
6
7
8
E E
D
1:5
10/14/2013
UNITS
mm
MATERIAL
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN IS THE PROPER
TY OF IRIDIUM SATELLITE
LLC AND/OR ITS AFFILIATES AND LICENSORS, UNLESS OTHERWISE STATE
D. NEITHER THIS DRAWING
NOR ANY SUCH INFORMATION MAY BE COPIED, REPRODUCED, TRANSMITTED
, DISTRIBUTED OR
OTHERWISE USED EXCEPT AS EXPRESSLY APPROVED IN WRITING BY IRIDI
UM SATELLITE LLC AND/OR
ITS AFFILIATES. NO RIGHTS OR LICENSES OF ANY KIND TO SUCH DRAWI
NG OR INFORMATION
(INCLUDING ANY INTELLECTUAL PROPERTY RIGHTS THEREIN) ARE TRANSF
ERRED TO, GRANTED TO,
PROVIDED TO OR RECEIVED BY THE RECIPIENT HEREOF AS A RESULT OF
THE DELIVERY HEREOF. THIS
MATERIAL MAY NOT IN WHOLE OR IN PART BE COPIED, STORED ELECTRON
ICALLY OR
COMMUNICATED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN AGREEME
NT OF IRIDIUM.
PROPRIETARY AND CONFIDENTIAL
GEOMETRIC TOLERANCING PER ASME Y14.5m-1994
3D REFERENCE
115-00026
DOCUMENT NUMBER 115-00026_D
DESCRIPTION ADE GROUNDING CABLE 3M LONG
ISSUE DATE
SIZE
A3
REVISION
SCALE
SHEET
1 of 1
DRAWN BY
E. Vulcu
TOLERANCES: UNLESS OTHERWISE SPECIFIED
LINEAR DIMENSIONS
0.15
ANGULAR DIMENSIONS
2
HOLE TO HOLE
0.10
THIRD ANGLE PROJECTION
REVIEWED BY
S Mallonee