Iridex OcuLight Symphony, Руководство оператора

Страница: 51 / 68

45
Operation
31144C-EN
1. Select the spot size.
2. Set the treatment parameters on the OcuLight console.
3. Position the patient.
4. Select an appropriate contact lens for the treatment.
5. Adjust the slit lamp and table, if necessary.
6. Ensure that all ancillary personnel in the treatment room are wearing
appropriate laser safety eyewear.
7. If using the OcuLight GLx or TX console, close the eye safety filter.
8. Select Treat mode.
9. Position the aiming beam on the treatment site.
10. If desired, adjust the intensity of the red aiming beam.
11. Press the footswitch to deliver the treatment beam.
12. If you require another wavelength during patient treatment:
• Remove your foot from the footswitch.
• Place the OcuLight console in Standby mode.
• Ensure that the appropriate fiber-optic connector and the SmartKey
are connected to the desired laser console, and
• Select the desired fiber-optic with the Fiber Switch on the
Symphony Slit Lamp Adapter.
• Resume treatment, following steps 7 - 11 above.
13. When you do not require the treatment beam, remove your foot from
the footswitch and place the OcuLight SLx/GLx console in Standby
mode.
Treating a Patient
REFERENCE
See the Using the OcuLight
Symphony Adapter section
of this manual for
instructions on selecting
the spot size and for
instructions on closing the
eye safety filter.
REFERENCE
See the Using the Control
Panel section of your
OcuLight console manuals
for instructions on using the
treatment controls and
displays.
REFERENCE
See Using the Slit Lamp and
Table Controls section of
this manual for adjustment
instructions.
REFERENCE
See the Clinical and Safety
sections of your
OcuLight console manuals
for important laser safety
eyewear and eye safety filter
information.
WARNING
Always keep the
OcuLight SLx/GLx console
in Standby mode when you
are not treating a patient.
Maintaining the
OcuLight console in
Standby mode prevents
accidental laser exposure if
the footswitch is
inadvertently pressed.