IRENIS EMU-8220 / EMU-8230 8 in 1 MPEG-4 AVC/H.264 HD Encod
er User’s Manual
9 / 47
2.4.6 SDI input interface connection
User can firstly find the SDI interface on the device according to the connector mark described on
the rear panel illustration, and then connect the SDI cable (in the accessories). One end is
connected to the head-end equipment while the other end to the encoder’s SDI input port. The
encoder’s SDI input port (SDI1…SDI8) and its connection are illustrated as follows:
2.4.7 ASI output interface connection
User can firstly find the ASI output interface on the device according to the connector mark
described on the rear panel illustration, and then connect the ASI cable (in the accessories). One
end is connected to the encoder’s ASI out connector (ASI1, ASI2) while the other end to the TS
stream multiplexer or modulator’s ASI input port. The encoder’s ASI output interface and its
connection are illustrated as follow:
2.4.8 IP Output Interface connection
Users can firstly find the DATA interface on the device according to the connector mark described
on the rear panel illustration, and then connect the network (CAT5). One end of the network cable
is connected to the encoder’s DATA output connector, while the other end to the TS stream
multiplexer IP input port or other device which can input IP signal. The encoder’s DATA
connection is illustrated as follows:
