Irenis Blankom HDE-275Q, Руководство пользователя

Страница: 31 / 45

User manual
Specifications are subject to change without notice. BLANKOM HDE-275Q EN 2019 V1.1
GENERAL NOTES ABOUT STREAMS:
MULTICAST STREAMS:
Multicast Address Ranges:
We recommend, that the addressing of your Multicast streams should be in conjunction with this listings
to avoid conflicts with other network equipment or protocols.
https://www.iana.org/assignments/multicast-addresses/multicast-addresses.xhtml
One small part from this:
IPv4 Multicast Address Space Registry
Last Updated
2018-01-05
Expert(s)
Stig Venaas
Note
Host Extensions for IP Multicasting [ RFC1112 ] specifies the extensions required of a host
implementation of the Internet Protocol (IP) to support multicasting. The multicast addresses are
in the range 224.0.0.0 through 239.255.255.255. Address assignments are listed below.
The range of addresses between 224.0.0.0 and 224.0.0.255, inclusive, is reserved for the use of
routing protocols and other low-level topology discovery or maintenance protocols, such as
gateway discovery and group membership reporting. Multicast routers should not forward any
multicast datagram with destination addresses in this range, regardless of its TTL.
Available Formats XML HTML Plain text
Registries included below

Local Network Control Block (224.0.0.0 - 224.0.0.255 (224.0.0/24))

Internetwork Control Block (224.0.1.0 - 224.0.1.255 (224.0.1/24))

AD-HOC Block I (224.0.2.0 - 224.0.255.255)

RESERVED (224.1.0.0-224.1.255.255 (224.1/16))

SDP/SAP Block (224.2.0.0-224.2.255.255 (224.2/16))

AD-HOC Block II (224.3.0.0-224.4.255.255 (224.3/16, 224.4/16))

RESERVED (224.5.0.0-224.251.255.255 (251 /16s))

DIS Transient Groups 224.252.0.0-224.255.255.255 (224.252/14))

RESERVED (225.0.0.0-231.255.255.255 (7 /8s))

Source-Specific Multicast Block (232.0.0.0-232.255.255.255 (232/8))

GLOP Block

AD-HOC Block III (233.252.0.0-233.255.255.255 (233.252/14))

Unicast-Prefix-based IPv4 Multicast Addresses

Scoped Multicast Ranges