Irenis Blankom HDE-275Q, Руководство пользователя

Страница: 32 / 45

User manual
Specifications are subject to change without notice. BLANKOM HDE-275Q EN 2019 V1.1

Relative Addresses used with Scoped Multicast Addresses
Multicast (as opposed to unicast) is used to send UDP packets from 1 source to multiple
destination servers. This is useful for example for streaming from a satellite/DVB-T receiver to
multiple receiving PCs for playback. Multicast can also be used on the output of an encoder to
feed multiple streaming servers. Multicast only works with UDP and is not possible with TCP due
to the 2 way nature of TCP, most commonly multicast is used with RTP and MPEG2-TS.
A multicast IP address must be chosen according to IANA information, we recommend using an
address in the range 239.0.0.0 to 239.255.255.255 as this is reserved for private use. Using
multicast addresses in the 224.0.0.0 range may clash with existing services and cause your
stream to fail. For more details see
http://www.iana.org/assignments/multicast-
addresses/multicast-addresses.xml
Choosing a UDP port number for multicast streams is also important. Even if you use a different
multicast IP for each of your streams, we strongly recommend using different UDP port numbers
as well. This is because a server and all software running on the server receives ALL multicast
traffic on an open port and extra processing is required to filter out the required traffic. If the
each stream arrives on a different port, the server can safely ignore any traffic on ports that are
not open. Port numbers MUST be chosen so that don't clash with any existing services or
ephemeral ranges. The ephemeral range for Windows Vista, 7, 2008 is 49152 to 65535, for older
Windows it is 1025 to 5000 and for Linux it is 32768 to 61000. For more information on
Windows see
http://support.microsoft.com/kb/929851 Care should also be taken to avoid
system ports 0 to 1024. See http://www.iana.org/assignments/service-names-port-
numbers/service-names-port-numbers.xml Generally one of the unassigned User Ports (1024-
49151) should be used, you can run the netstat -abn (as admin under windows) command to see
which ports are currently in use.
Registered port
A registered port is a network port (a sub-address defined within the Internet Protocol , in the
range 1024–49151) assigned by the Internet Assigned Numbers Authority (IANA) (or by Internet
Corporation for Assigned Names and Numbers (ICANN) before March 21, 2001,
[1]
or by USC/ISI
before 1998) for use with a certain protocol or application.
Ports with numbers 0–1023 are called system or well-known ports; ports with numbers 1024-
49151 are called user or registered ports, and ports with numbers 49152-65535 are called
dynamic and/or private ports.
[2]
Both system and user ports are used by transport protocols (TCP,
UDP, DCCP, SCTP) to indicate an application or service.

Ports 0–1023 – system or well-known ports

Ports 1024–49151 – user or registered ports

Ports >49151 – dynamic / private ports
https://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers
Range for Ephemeral port
The Internet Assigned Numbers Authority (IANA) suggests the range 49152 to 65535 (2
15
+2
14
to 2
16
−1) for
dynamic or private ports.
[1]