Irenis BLANKOM HDC-5016 Скачать руководство пользователя страница 45

Страница: 45 / 55

HDC-5016-HDC-5064 IP to QAM Modulator User Manual

Date 8. Dezember 2022 *) depend on model types

BLANKOM-HDC-5016-32_IP2QAM-modulator-V1.6-RR-12-2022.docx

Installation Notes

All types of the IRENIS-BLANKOM family are 19“devices with 1 RU height designed for installation in 19” racks. In addition

to the front panel screws an internal module support is required at the rack.

Depending on the Frontend used and the operating adjustments, the SAT-RF-input ports carrying DC Voltage (13V /18V,

max. 400 mA).

By connecting a mains cable, the device can become functional without any auxiliary appliances. The power supply units

are designed for the wide range of 100-230V AC; a manual adjustment of the voltage is not necessary.

For some models the second power connector is feeding another independent power supply for internal redundancy. For

a maximum of redundancy both power supplies should use different circuits.

All the outputs are decoupled from one another. Thus, the circuit does not have any effect on the functioning of the device.

Connections that are not required need not to be terminated.

Suggestion:

CAT 6E Ethernet cable for GbEthernet, DSTP (double shielded twisted pair) for the streaming ports

Note:

IPv4 global scope sessions use multicast addresses in the range 224.2.128.0 - 224.2.255.255 with SAP Announcements

being sent to 224.2.127.254 Port 9875 (note that 224.2.127.255 is used by the obsolete SAPv0 and MUST NOT be used).

IPv4 administrative scope sessions using administratively scoped IP multicast. The multicast address to be used for

announcements is the highest multicast address in the relevant administrative scope zone.

For example, if the scope range is 239.16.32.0 - 239.16.33.255, then 239.16.33.255 is used for SAP Announcements.

Sources:

http://www.etsi.org/deliver/etsi_en/300400_300499/300468/01.15.01_60/en_300468v011501p.pdf

https://www.dvb.org/standards

Содержание BLANKOM HDC-5016
























































Результаты поиска

Содержание BLANKOM HDC-5016

Отзывы:

Похожие инструкции для BLANKOM HDC-5016

Бренды по названию

Популярные бренды

Irenis BLANKOM HDC-5016, Руководство пользователя

Результаты поиска

Содержание BLANKOM HDC-5016

Отзывы:

Похожие инструкции для BLANKOM HDC-5016

Бренды по названию

Популярные бренды