HDC-5016-HDC-5064 IP to QAM Modulator User Manual
Date 8. Dezember 2022 *) depend on model types
BLANKOM-HDC-5016-32_IP2QAM-modulator-V1.6-RR-12-2022.docx
17
If you know, that your input streams are NOT using the same PID-numbers in their SPTS/MPTS streams Tables
(DVB-PSI/SI) you can uncheck PID-remapping which is for avoiding conflicts.
(Like as you are using different devices in a network with same IP addresses = Conflict)
If you know you are not having/passing CA-PIDs in your input streams, you can check CA-Filter.
But if you want to save bitrates and have unnecessary EMM/ECM-PIDs in your source streams, you can filter
them out.
Add Input by pressing the ‘+’:
a popup pops up ;-):
add it and after a few sec.
IGMP V3 ‘snooping’ (is not equal full IGMP support like in a L3 Switch) has a lot of more options:
However, that’s for experts
😉
3 Inputs to select: DATA front,
DATA1/2. Unicast:
Within here means for UDP/RTP
inputs only, no "TCP" based input:
If your source is UDP unicast
transmitting to DATA1
(192.168.1.136
), then the Source
output address should be like this
format: udp://192.168.1.136:xxxx
(192.168.1.136 is DATA1 interface
IP, xxxx is the port number).
