8
2. Prior to Use
Before using, ensure that the package contents include the following:
Quantity (1) iReliev Pain Relief Patch Device
Quantity (2) Snap Style Electrode Pads
Quantity (1) 3V CR2032 Battery
2.1 Insert battery in the correct direction (+ Up). To check that the battery has been fitted correctly please press the ON/UP button once and the led will turn
green. After checking, press the DOWN/OFF button to switch the unit off.
2.2 Position the iReliev Pain Patch device and electrode pad so that the plugs and jacks are aligned on a flat surface. Then press down until electrode pad is
completely snapped in. Do not remove the clear plastic shield from electrode until the unit is ready to be placed on the body.
2.3 Ensure the skin is clean and thoroughly dry wherever you intend to place Pain Relief Patch Electrode Pad.
2.4 Remove plastic shield from electrode pad by holding its outer edge, then peeling off the clear plastic shield backing. Do not discard
