iRecord PMR-200, Руководство пользователя

Страница: 30 / 40

I attached iRecord Pro to my PC/Mac, the status LED is green, but it is not
detected on PC.
Please make sure that no USB device is attached to the USB host port of iRecord
Pro, when you connect it to a PC/Mac.
When I record an NTSC movie why does my player show a frame rate of 24
frames per second rather than 30 frames per second?
Movies are actually recorded at 24 frames per second but are displayed on NTSC
systems at 30 frames per second by duplicating video fields. To enhance the NTSC
movie recording quality, iRecord Pro automatically performs, so called, inverse
telecine operation which removes the redundant duplicated video fields before
recording. This feature does not affect non-telecined sources which are recorded
at 30 frames per second or 25 frames per second for NTSC or PAL/SECAM sources,
respectively.
How long will it take iRecord Pro to recognize my storage device?
It takes anywhere from 5 to 30 seconds to recognize a USB storage device,
depending on the size of storage device.
Is it possible to play content from my iPod or PSP while iRecord Pro is
recording onto my iPod or PSP?
No. While iRecord Pro is recording data onto your iPod or PSP, the user interface of
iPod or PSP is disabled. However, when you stop the recording, you may
immediately play it on iPod or PSP without detaching them from iRecord Pro.
Page 29