iRecord PMR-200, Руководство пользователя

Страница: 27 / 40

Troubleshooting
Make sure that before pressing the Record button the input source is
turned on and is providing audio or video signal to the iRecord Pro.
Make sure that the AV cables are securely connected to both the input
source and the iRecord Pro.
If status LED does not illuminate on power up, do a power cycle again,
i.e. turn off iRecord Pro, wait 10 seconds and turn on iRecord Pro.
If your iPhone, iPod or USB storage device is not recognized by th
iRecord after 30 seconds (status LED does not turn green) ry the
following steps:
Remove and re-insert iPhone, iPod, PSP or USB device.
Reset iPod. (Please see your iPod user manual)
Make sure PSP is in USB mode.
If iRecord Pro does not get detected by your PC/Mac, although the status
LED shows green, please make sure that no USB device is attached to the
USB host port of iRecord Pro.
Note:
1) To save power, the system shuts itself off automatically if no recording
activity is detected for longer than 10 minutes. The system has to be
switched on again manually by pressing the Power button.
2) While recording is in progress the Power button is disabled. This is
to ensure that recording does not get interrupted accidentally.
,
PSP e
Pro t
13
Page 26