28
Parameter
Description
GevGVSPExtendedIDMode
Enable GVSP extended ID code.
GevCCP
Controls the permissions of applications to access the camera.
ExclusiveAccess: The application that connected to the camera can
can modify the register.
ControlAccess: The application that connected to the camera can
can read the register, but cannot modify it.
GevPrimaryApplicationSock
et
Displays the UDP source port of the application that connected to
the camera.
GevPrimaryApplicationIPAd
dress
Displays the IP address of the application that connected to the
camera.
GevMCPHostPort
The destination port of the camera message channel.
GevMCDA
The destination address of the camera message channel.
GevMCTT
Timeout period of message channel.
GevMCRC
The maximum number of message channel retransmissions.
GevMCSP
Displays the source port of message channel.
GevStreamChannelSelector Select the streaming channel number if the camera supports
multiple streaming channels.
GevSCPinterfaceIndex
Displays the logic channel of device.
GevSCPHostPort
Port of the camera streaming channel.
GevSCPSFireTestPacket
Sends a test message.
GevSCPSDoNotFragment
If the message is too long, whether to send the message in
fragments and add fragmentation position 1 in the IP header.
GevSCPSPacketSize
Message length of the streaming channel.
GevSCPD
Controls the interval between messages.
Modifying the value can reduce the requirements on the network
card, but the maximum bandwidth will be affected. Acquiring a
single frame requires more time.
GevSCDA
The destination address of the streaming channel.
GevSCSP
The destination port of the streaming channel.
FrameTriggerCount
The number of signals from frame trigger.
FrameTriggerLostCount
The number of lost signals from frame trigger.
LineTriggerCount
The number of signals from line trigger.
LineTriggerLostCount
The number of lost signals from line trigger.
