11
FrameActive
: A high-level (low-level) area captures multiple lines, and an image will be
generated until meeting the defined line height. If the defined line height is not met, the image
will be directly generated according to the captured line height.
FrameActive
Figure 3-10
FrameBurstActive
: Multiple images can be outputted within a trigger signal high level (low
level). When the adaptive line height is greater than the defined line height, you can set
TriggerFrameCount
to increase the number of frames captured by the camera.
Adaptive line height: The maximum line height that can be continuously captured in a
high-/low-level area of the camera after configuring other camera parameters.
When the adaptive line height is smaller than the defined line height, the height of the
captured image is the adaptive line height. In this case,
FrameBurstActive
is the same as
FrameActive
.
When the adaptive line height is greater than the defined line height, the height of the
captured image is the defined line height, and multiple frames can be output at the same
time. If the line height of the last frame is less than the set line height, the image will be
displayed according to the actual last frame line height.
FrameBurstActive
Figure 3-11
