IRAN KHODRO ARISUN, Руководство пользователя

Страница: 62 / 89

61
4
ALTERNATOR AND FAN BELT
Engine and gearbox Running-in
(Sealing)
Gradual running-in of a new engine and
drive transmission system (gearbox and
differential) is of high important in the
vehicle, which shall be under complete care
of the driver, because in this case, you can
be ensured that different components of
vehicles in a long-term period will have their
most efficiency at lowest cost. It shall be
added that, lubrication process of different
parts is of special importance not only
about the engine and gearbox, but also
in other parts of chassis including wheels
bearings and other driving parts of a vehicle.
This process shall be completed through
a gradual manner during first 3000 km of
driving.
It shall be considered that during running-
in period, no extra load shall be inflicted
on the engine, for example driving at 4th
gear at low speed on uphill roads. In these
cases, lower speed gears (heavier gears)
shall be used. Showing patience for a new
vehicle in running-in period (sealing) is of
great important both at driving mode and idle
mode.
At first 800 kilometers of driving, the
maximum speed shall be observed as
following:
Gear 1: 15 Km/.h.
Gear 2: 30 Km/h.
Gear 3: 50 Km/h.
Gear 4: 65 Km/h.
Gear 5: 80 Km/h.
From 800 kilometers of driving up to 1600
kilometers, the vehicle speed shall not
exceed the following numbers, and after that,
increasing speed can be done gradually:
Gear 1: 20 Km/.h.
Gear 2: 40 Km/h.
Gear 3: 60 Km/h.
Gear 4: 80 Km/h.
Gear 5: 90 Km/h.
After finishing the first 800 kilometer
driving, drive to IKCO authorized repair
workshop for performing free service
and checking, the sheet of free service
and list minutes will be delivered to you
at time of vehicle delivery. All of IKCO
authorized repair workshop will take
action to perform required service by
presenting free service sheet, providing
that the abovementioned card is sealed
and signed by IKCO.
ATTENTION
:
Never drive at neutral gear in steep slopes, whether the engine is
powered ON or OFF.