IRAN KHODRO ARISUN, Руководство пользователя

Страница: 59 / 89

58
4
VEHICLE MAINTENANCE
Differential fluid checking
At time of delivery of new vehicle, its differential
is filled with fluid. In each step of regular
services, the differential fluid shall be checked.
For this purpose, at first park the vehicle on a
balanced and level ground, at then, completely
clean around the differential fluid release bolt,
unscrew the bolt of cap of A channel, and
check the fluid level. Correct amount of fluid
in differential is when it is filled up to thread of
abovementioned bolt. (Figures 1 & 2)
Figure 2 Figure 1
Front wheels grease checking
After 8000 kilometers driving, grease
application shall be done for the hubs of front
wheels. For this purpose, you shall take out hub
lid and clean it completely, the check the ball
bearings and fill them with grease.
Engine oil checking
The brake fluid shall be poured in a reservoir
located on front and in the engine place near
to steering rod. Check the brake fluid in such
reservoir once a 1600 kilometers, and fill the
reservoir if required up to 12 mm left to upper
level of reservoir. Adding fluid shall be done at
long intervals, and if fluid reduces down in a
significant amount, this suggests brake system
fluid leakage, and its place shall immediately be
determined and repaired.
Take care that air ventilator in brake fluid
reservoir is not blocked, because its blockage
will result of brake fluid leakage. Brake fluid use
in ARISUN shall have at least DOT4 standard.
Caution
- Brake fluid is severely toxic, and shall be kept in closed container, out of reach of
children. In case of eating brake fluid, you shall immediately refer to physician.
- Avoid contact of brake fluid with hand and eyes. In case of contact with the skin,
wash the relevant place with plenty of water, and in case of contact with eyes,
refer to the physician after washing.
- Take care not to pour brake fluid on hot engine due to existence of firing possibility.