5
7 Mounting Options
8 Camera Arm Removal
NOTE: The camera/arm needs to be removed from the back box to allow the back box to be mounted to
the designated mounting wall, ceiling, or parapet surface.
1. Using the Allen wrench (supplied) loosen the 4 screws located on the
corners of the power/data back box.
2. Unplug the two camera-side connections from the back box (Figure 3).
3. Remove the camera/arm module from the back box.
Audio Cable Connections
The audio cable is inside the camera arm. The audio socket is a 3.5 mm TRRS.
The pinouts for the socket are:
1. (Tip) LINEOUTL
2. (Ring) LINEOUTR
3. (Ring) AUD_GND
4. (Sleeve) MICIN
Figure 2
Wall Mount
Ceiling Mount
Parapet Mount
Figure 3
