4
4 Installation
NOTE: This manual describes how to install the IQeye Sentinel Series camera system, and details the
wall, ceiling and parapet mounting options. Installations should be performed by qualified service
personnel only in accordance with local codes.
5 Parts List
The following depicts the parts included (Figure 1):
1. Indoor / Outdoor Camera and Lens Module with Sunshield installed
2. Wall, Ceiling & Parapet Arm
3. Power / Data Back Box
Tools required:
3 mm Allen wrench (supplied)
Small straight-blade screw driver
Punch down tool (supplied)
6 Camera Fittings
The IQeye Sentinel cameras are shipped with Heyco Liquid Tight snap-in
plugs (#4014) that are factory installed into the back box. These plugs
are rated to IP67 and can adequately seal cable diameters that range
from 3-5 mm (0.12-0.2 in).
For larger cables, like CAT5, it is recommended to replace the factory
installed plugs with the optional Heyco Liquid Tight fittings (#3207) that
are included in the accessory kit. These fittings are appropriate for cable
diameters that range from 2.90 mm to 6.35 mm (0.114 - 0.250 in).
Figure 1
2
3
1
