Chapter 6 Document Camera
6.1 Steps to operate document camera
· Open the door and gently unfold the document camera.
· Put the object on the display stand and run the "IQ Interactive Education Platform V6.0" software to make physical display, dynamic annotation,
contrast teaching and other functions.
Chapter 7 Projector Control Code
7.1 Steps to set the control code
· Make sure the connection of the IQAiO and projector is OK.
· Enter the “Device Manager” of the computer to check the projector serial number and run the software.
· Find out the right code for the projector. If the code isn’t available, please set the code correctly. Take the EPSON projector as example, please
refer to the operation as below:
· After setting the serial number, configuration and commands, please click “send”.
EPS-820, EPS-811
Baud rate: 9600
HID: Vid:Ox:1314,Pid:Ox:1066
POWER ON:
‵
PWR ON
‵
,Od,Oa
POWER OFF:
‵
PWR OFF
‵
,Od,Oa
RGB INPUT1:
‵
SOURCE 11
‵
,Od,Oa
RGB INPUT2:
‵
SOURCE 21
‵
,Od,Oa
VIDEO:
‵
SOURCE 41
‵
,Od,Oa
S-VIDEO:
‵
SOURCE 42
‵
,Od,Oa
With the IQ Control code software, the control code to power on/off the projector could be written and kept in the central system for more
convenient operation on the projector. (IQ Control code software is saved in E:/IQBoard)
*Note: Please adjust the brightness if it’s too dark and refer to the software user manual for more details.
Model:
Command:
06
