16
Chapter 4
– Using the Control Panel
4.4.8 Filter Life Reset
The Filter Life Reset function allows the Filter Life Monitor to be reset after a new
filter has been inserted. As a result, the appropriate filter life LED on the control
panel will be reset to green and the hour count in the Filter Life display will be
reset to the full life span of the new filter.
Note:
Resetting the Filter Life Monitor
will also cancel the “Replace Filter” warning from the main display window.
1.
To reach the New Filter function from the main display window, press the
Menu
key seven times.
2.
Press and hold the
Enter
key until the flashing cursor appears. The flashing
filter refers to the filter and its position within the system.
3.
Press the
key to select the filter that has been replaced.
4.
Press the
Enter
key to confirm that the selected filter has been replaced.
5.
To safeguard against inadvertently resetting the life of the wrong filter, the
selection needs to be reconfirmed. To reconfirm the filter change and exit the
Filter Life Reset window, press the
Enter
key.
Note:
If the wrong filter has
been selected, or if you wish to exit the enter mode, press the
Menu
key. This
leaves the Filter Life unchanged.
6.
Upon successful reset of the filter life, the new remaining filter life (taking the
currently selected fan speed into account) will be displayed.
4.4.7 Time & Day Setting
In order to use the timer function, the current day and time must be set. Once the
current day and time are set, they will only need to be reset if the unit is
disconnected from the power supply for more than an hour.
1.
To access the Time & Day function from the main display window, press the
Menu
key six times.
2.
Press and hold the
Enter
key until the cursor starts to flash.
3.
Select the hour by pressing the
key.
4.
Press the
Enter
key to save the hour setting and to proceed to the minute
setting.
5.
Select the minutes by pressing the
key.
6.
Press the
Enter
key to save the minute setting and to proceed to the day
setting.
7.
Select the day of the week by pressing the
key.
8.
Press the
Enter
key to save the day setting and to exit the enter mode.
9.
Press the
Power
key to return to the main display.
Note:
The display will
automatically return to the main window if no key is pressed for 15 seconds.
Содержание GCX series
Страница 1: ...G C X S e r i e s High Performance Air Cleaning System User s Manual Swiss Made...
Страница 26: ...26 Notes...
Страница 27: ...27 Notes...
Страница 28: ...090304_IQ_MA_GC_US www iqair com Swiss Made...
