IQ CV810, Руководство пользователя

Страница: 16 / 35

14
3. Remote Control
Remote control instructions: remote control is divided into two types: infrared remote control and wireless remote
control. Please read the following contents according to the actual remote control type.
3.1 Match Code for Wireless Remote Control
One to One Code Matching:
Press the "set" and "*" keys combined for 3 seconds, LED indicator starts flashing. Camera
receive the signal and power on, LED indicator will go off if code matching successfully.
The camera can be controlled by this wireless remote control only after one to one code
pairing. Otherwise please clear the code matching of this remote control, or use other remote
control to pair with the camera again.
If one to one code matching failed, the red LED light flashes for 20 seconds and then goes
off, camera will stop code match and turn on sleep mode; Press any key to wake up the
camera and re-match code.
Note: After code matching successfully, please select the camera address to control it.
Clear Code:
Press the "set" and "#" keys combined for 3 seconds, LED indicator starts flashing. Camera
will power off and on, the LED indicator will go off if clear code successfully.
Sleep Mode and Wake Up:
Press any key to wake up the camera from sleep mode.
3.2 Keys Introduction for IR Remote Control
1) In this manual, “press the key” means a click rather than a long-press, and a special note will be given if a
long-press for more than one second is required.
2) When a key-combination is required, do it in sequence. For example,“
【
*
】
+
【
#
】
+
【
F1
】
”means press“
【
*
】
”first
and then press“
【
#
】
” and last press“
【
F1
】
”.