IQ Power Tools iQMS362i-230V CE страница 4 Скачать руководство пользователя

Страница: 4 / 41

iQMS362i CE

Operator’s Manual

888-274-7744

www.iqpowertools.com

gli

KEY SYMBOLS & SAFETY RULES

Symbols on the machine

WARNING! The machine can be a

dangerous tool if used incorrectly or

carelessly, which can cause serious or

fatal injury to the operator or others.

Please read the operator’s

manual carefully and make sure

you understand the instructions

before using the machine or

performing any maintenance.

Explanation of Warning Levels

The warnings are graded in three levels.

Used if there is a risk of serious injury or death for

the operator or damage to the surroundings if the

instructions in the manual are not followed.

Used if there is a risk of injury to the operator or

damage to the surroundings if the instructions in

the manual are not followed.

Used if there is a risk of damage to materials or the

machine if the instructions in the manual are not followed.

NOTICE

1.1

Always wear hearing protection.

Always wear protective goggles

and/or a visor.

High voltage. Risk of an electric shock.

Turn off machine and unplug before

transportation, maintaining, adjusting

and changing the blade.

Should not be disposed of with general

household waste, but collected

separately for reuse or recycling.

Keep your hands and feet away

from the blade.

248014

CE certified.

Wear hand protection.

Содержание iQMS362i-230V CE










































Результаты поиска

Содержание iQMS362i-230V CE

Отзывы:

Похожие инструкции для iQMS362i-230V CE

Бренды по названию

Популярные бренды

IQ Power Tools iQMS362i-230V CE, Руководство оператора

Результаты поиска

Содержание iQMS362i-230V CE

Отзывы:

Похожие инструкции для iQMS362i-230V CE

Бренды по названию

Популярные бренды