iQMS362 CE
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh
, E
N
Holding the table in front of you, on the left side of the
table line is the 1st notch wheel roller with the guide rail.
Push the table along the guide rail until the 2nd and
3rd notch wheel rollers are on the guide rail.
Put the remove table lock lever in the up position.
The remove table lock lever should remain in the up
position for normal operation. The remove table lock
lever should only be put in the down position for table
removal and maintenance.
IF THE REMOVE TABLE LOCK
LEVER IS LEFT IN THE DOWN
POSITION INADVERTENTLY THIS COULD CAUSE DAMAGE
AND/OR INJURY
WARNING!
ASSEMBLING
7.7
