IPTC Albatross™ DEX28-GE2P –Quick Installation Guide
2
Parts List
The shipment of your DEX28 VoIP Gateway includes the following items:
One DEX28-GE2P VoIP Gateway, preconfigured in
factory for:
•
Switch Side (to PBX), or
•
Extension Side (to DTS)
One 2m long power supply cord (black).
One desktop AC/DC power adapter 18W.
One 2m long RJ45 STP patch cable (green).
Note
: Patch cable can be used either to connect DEX28-
GE2P to local area network, or to connect its console port
to RS232 using RJ45-DB9 adapter.
One RJ45 to DB9 RS232 adapter (black).
The following cables will be locally sourced:
•
Cables between DTS and DEX28-GE2P configured in Extension Side mode.
•
Cables between PBX and DEX28-GE2P configured in Switch Side mode.
Unpacking
Check that the equipment has not been damaged during transport. Damaged equipment that needs to be replaced or
repaired at a service shop must be reported immediately and sent back.
Aids
To be able to install DEX28-GE2P one of the following equipment is necessary:
Serial setup (over Console port):
•
Terminal or PC with terminal emulation (HyperTerminal)
Web setup (using network):
•
PC installed with Internet Explorer (version 5.5 or higher)
