TECHNICAL DETAILS AND OPERATION INSTRUCTIONS FOR
IPS121
8
Power is changed in % of maximum power.
If "220V 30-20000kHz" submenu is selected in main MENU, you will see the submenu which
allows work with signals in 30-20000kHz range outputted through "220V" socket to the power lines. This
allows to fully imitate data transmission channel in 220V lines.
With selection of line "Modulation OFF" it is possible to select modulation of carrier signal: FM,
AM or PWM.
If FM is selected "Frequency" option will appear allowing selection of modulation signal
frequency. "Deviation" option will appear for FM allowing selection of highest deviation for modulated
signal frequency from value of its carrier frequency
If PWM is selected two options will appear: "Frequency" allowing selection of frequency of
impulse and "Ratio" allowing selection of interval between impulses.
Power is changed in % of maximum power.
If "IR 940nm" submenu is selected in main MENU, you will see the submenu which allows work
with IR emitter located on the front panel (Pic. 1 Pos. 7).
With selection of line "Modulation OFF" it is possible to select modulation of carrier signal: FM,
AM or PWM.
If AM or FM is selected "Frequency" option will appear allowing selection of modulation signal
frequency (for AM and FM modulation). "Deviation" option will appear for FM allowing selection of
highest deviation for modulated signal frequency from value of its carrier frequency
If PWM is selected two options will appear: "Frequency" allowing selection of frequency of
impulse and "Ratio" allowing selection of interval between impulses.
Power is changed in % of maximum power.
Nonlinear element
There are nonlinear elements connected to the contact pairs "1-2" and "7-8" of "RJ-45" socket in
order to imitate nonlinearity in the wireline (Pic. 7).
