75/83
f you select "N.O" in "Input sensor setting", when the device or circuit
makes DI and the GND pin disconnected, the camera input alarm is
triggered and executes the action the user has set: send snapshot to
E-mail address.
If you select "N.C" in "Input sensor setting", when the external device or
circuit makes DI and GND pin connected, the camera input alarm is
triggered, and executes the action the user has set: send snapshot to
E-mail address.
b. I/O PIN definition
•
G (Ground):
Initial state is LOW
•
DO (Digital Output):
DC 5V
•
DI (Digital Input):
Max. 50mA, DC 5V
2. I/O Setup
a. Click I/O Setting from the system setup page via IE, and check
“Out1” to enable I/O signal.
Содержание iDC-1DCF
Страница 1: ...1 83 User Manual IP VANDAL DOME CAMERA iDC 1DCF ...
Страница 53: ...53 83 ...
