22
iPor t ver. FS
Ins tr uction Manual
In Case Of Difficulty
If your iPort doesn’t seem to be working properly, before calling iPort or returning the unit to the
store, please read-through the following section. You may be able to correct the problem yourself
with a minimum of inconvenience. If, after trying all of the applicable solutions your iPort still seems
not to be working properly, call your dealer or call us at 888 45-IPORT.
Section
Problem
Solution
Power
iPort logo jewel status indica-
tor is not lit when an iPod is
docked into an iPort.
1) Insure that the power supply is plugged into an AC
power outlet and that the DC plug is securely plugged-into
the power connector on the wall plate or Connection Box.
2) Insure that the iPod is fully seated into the iPort.
3) Insure that one end of the Double Cable is plugged into
the iPort dock and the other end is plugged into the multi-
pin connector on the included Connection Box.
4) If using an FS-1, insure that the switch on the bottom of
the unit that adjusts the brightness of the status indicator
is completely in the bright or dim position.
Status Indicator
iPort logo jewel status indica-
tor turns off immediately after
docking an iPod.
1) Check to see if iPod is starting up (Apple logo on iPod
display). Status indicator will illuminate once the iPod has
completed start up.
Status indicator flashes when
trying to activate data transfer
mode.
1) Insure that USB connector is securely connected to
computer.
Status indicator remains RED
after being disconnected from
computer.
1) If using a 3G iPod, physically undock the iPod from the
dock and after a few moments the iPod menu will appear
on the display. Redock iPod to stream music.
2) Pressing and holding the jewel button for five seconds
will reset the iPort dock (FS-2 through FS-5 models),
changing the status indicator back to WHITE.
