How does iPort make audio and video connections?
Each iPort IW is accompanied by an audio wallplate. Connections are made via stereo RCA
jacks. The balanced video wallplate (standard with the IW-5, an optional accessory for all other
models of IW) enables connections via either S-Video or composite video. The Unbalanced
Video Kit connects via composite video connection only.
Each iPort FS is accompanied by either the Basic Connection Box (BCB) or Advanced
Connection Box (ACB). Connections from the BCB are made via line-out 3/4” jack or stereo
RCA jacks for audio and S-Video or composite video for video. Connections from the ACB are
made via Cat5 through wallplates for long distance runs (see below for distances). Connections
at the wallplates are the same as the IW.
How far can I run the Cat5 for the iPort?
The maximum recommended length for balanced audio distribution is 500 feet. The audio
signal is a balanced line level signal so it can travel long distances with out any signal loss or
noise. The maximum recommended length for balanced video distribution is 250 feet. The
maximum lengths for unbalanced distribution is 25 feet for both audio and video signals.
What type of cable may be used to connect the iPort IW to its audio and/or video wall plates?
Cat5, Cat5E or Cat6 can be used to make the connection between the iPort IW and the
associated wallplates - any eight-conductor cable that works with an RJ-45 connector.
How far can I run the connecting Cat5 wire before needing to add a supplemental power supply?
Runs up to 250 feet can be made and then either a supplemental power supply would be
needed at the iPort location or a run of 18 AWG stranded copper 2 conductor cable from the
wallplate to the iPort would be connected to the supplemental power connectors.
How do I connect the supplemental power supply?
Simply run a length of 18/2 speaker wire from the wallplate’s Aux Power 2-pin connector to the
iPort’s Supplemental Power 4-pin connector utilizing the 15V and ground connectors. (4 pin
connector is used for incoming power from the audio wallplate and outgoing power to video
wallplate if using the 18/2 cable)
Can I order a supplemental power supply from iPort?
Yes, PN-70015
Can the iPort IW interface (synchronize iTunes) with a PC or Mac?
No. The IW models do not have USB connectivity. All FS models include a USB cable and
the ability to sync with iTunes.
Why isn’t there a component video connection video wall plate?
The iPod only outputs S-video and composite video.
Can I hook up an iPort to my stereo system directly?
Yes, the iPort can be connected to any stereo just like a CD player, or cassette deck.
iPort FAQ
7
5/24/06
connect
