menu analog ( active only if in OU 2 an analog signal is set)
operation modes of the switching outputs
notes:
•
The following examples and descriptions of the switching output 1 (SP-1) refer to the
switching function „normally open“ (no). If the switching output 1 is set „normally
closed“ (nc) the states are reversed.
•
The minimum range between the switching outputs (SP.1 and rSP.1) is 1% of the
temperature range; stated by the system.
•
The smallest adjustable hysteresis is 1% of the temperature range; stated by the
system.
•
All examples are effective for output 2, if this output is defined as switching output
(SP-2) also.
Ou2= analog output
analog start value
analog stop value
damping of the analog output
error–signal for analog output
(in 4 ... 20mA / 20 ... 4mA only)
error–display for analog output
(in 4 ... 20mA / 20 ... 4mA only)
MANUAL • Subject to alteration! Version:
June 2017
ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
8