connection of the PT100 sensors
The connection of a resistance thermometer takes place via a M12-socket on the device
side. 4-wire system PT100 sensors with integrated M12-connector can be connected di-
rectly or with a connection cable (e.g.
VK030F25
) with the temperature monitor.
For PT100 sensors with a fixed cable use a M12-connector (e.g.
VK003028
). Depending
on the version the connection pins must be bridged, as you see below:
2-wire
3-wire
4-wire
white
white
white
white
white
red
red
red
red
MANUAL • Subject to alteration! Version:
June 2017
ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
16
