w
w
w
.i
p
e
le
ctr
o
n
ix.c
o
m
IPEX
(IP Electronix)
PH232Ex1Plus
:
User’s Manual
Page 5 of 25
Doc No. : PH232Ex1Plus-UM-001
1 September 2019
4.
Top Panel
General Indicators:
POWER LED (Green):
It is turned ON, when the power supply connects to +VDC and GND correctly.
PoE LED (Green):
It is turned ON if the device takes its power from a network switch with PoE.
Port Indicators:
TCP Server LED (Green):
Blinking this LED shows that the TCP Server mode for this port is selected and device is
trying to connect in this mode. If the device connects to a client, then this LED turns on continuously.
TCP Client LED (Green):
Blinking this LED shows that the TCP Client mode for this port is selected and device is
trying to connect in this mode. If the device connects to a server, then this LED turns on continuously.
UDP LED (Green):
Blinking this LED shows that the UDP mode for this port is selected and device is trying to
connect in this mode. If the network works properly, then this LED turns on continuously.
PE LED (Red):
It is blinking if the device detecting a Parity Error in data.
RX LED (Yellow):
It is blinking when the device receive data on serial port.
TX LED (Green):
It is blinking when data is transmitting from the device serial port.
