iPECS LIP-9002 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 61

iPECS LIP-9002 Скачать руководство пользователя страница 57

LIP-9002 User Guide - ST

49

Regulatory Information

[EU]

European Union Declarations of Conformity

Ericsson-LG Enterprise Co., Ltd. declare that the equipment specified in
this document bearing the “CE” mark conforms to the European Union
Radio and Telecommunications Terminal Equipment Directive(R&TTE
1999/5/EC), including the Electromagnetic Compatibility
Directive(2004/108/EC) and Low Voltage Directive(2006/95/EC).

Copies of these Declarations of Conformity (DoCs) can be obtained by
contacting your local sales representative.

[USA/CSA]

FCC/IC Interference Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 /RSS-GEN of the FCC/IC rules.
Operation is subject to the following two conditions:

«
...
55
56
57
58
59
...
»

Содержание LIP-9002






























































Отзывы:

Нет отзывов