Universal WiFi BAT Installation Guide (rev 1.0) 19
Programming when ONLY using Keybus to send Signals
(Not Recommended)
: Vista Programming for Communications -
GSM Emulation:
See Supported Panels section on page 25 to verify your p
anel’s
revision number and GSM emulation programming.
Section
For BAT as
Sole
Communicat
or
For BAT in use
with another
Communication
Device for
Failover
For Dual
Reporting
Code
Summarization
*29
Enter 1
Enter 1
Enter 1
This enables GSM.
The BAT Emulates a
GSM.
*42
N/A
Enter Central
Station Receiver
Number
Enter Central
Station Receiver
Number
Secondary Phone
Number
*43
Enter
Account
Number
Enter Account
Number
Enter Account
Number
This is the central
station account
number
*49
Enter 5
Please refer to
panel manual for
your particular
application
requirements
Please refer to
panel manual for
your particular
application
requirements
Dual Reporting;
Setting to 5 sends all
reporting to both
primary and
secondary.
*54
Enter 0
Enter 2
Enter 0
The time it takes for
the communicator to
switch from primary
to secondary.
*55
Enter 1
Enter 1
Enter 1 (BAT is
Primary
Communicator)
Setting to 1 gives
signal priority to
GSM (BAT).
*65
Enter 1
Enter 1
Enter 1
Report Code for
Openings.
*66
Enter 1, 1
Enter 1, 1
Enter 1, 1
Report Code for
Arming in Away and
Stay.
*193
Enter 1, 0
Enter 1, 0
Enter 1, 0
1 turns on/off
keypad address. 0
sets sound to beep.
