Universal WiFi BAT Installation Guide (rev 1.0) 18
Vista Panel Programming
See Supported Panels section on page 25. All Control Panels
must have a Phone Number in the Panel and an Account Number
in the Panel. As long as your Reporting Codes are in the Panel
and is transmitting in Contact ID it will send signals.
Programming when using TELCO (Recommended)
:
Programming on Vista (BAT WiFi as Sole Communicator):
Section
For BAT as Sole
Communicator
Code Summarization
41
Enter Phone
Number
43
Enter Account
Number
49
Enter 5
For All Communications
to BAT
54
Enter 0
No Delay Between
Communicators
55
Enter 0
Phone Line
Communicates First
65 & 66
Enter 1
If you want
Opening/Closing Reports
193
Enter 1, 0
Enable to turn on
Address 20
