IPC 1310P4 M, Руководство пользователя

Страница: 14 / 116

14
CLOTHING AND EQUIPMENT
Always wear anti-slip sole
footwear.
Wear protective goggles or
visor and safety wear.
It is advisable to wear work overalls in order to
reduce the risk of injury in the event of accidental
contact with a high pressure jet.
FIELDS OF APPLICATION
The high pressure water cleaner has been deve-
loped for washing vehicles, machines, containers,
façades, stables and for removing rust without
generating dust or sparks.
During cleaning, ensure that no dangerous substan-
ces of the object to be cleaned are dispersed into
the environment (such as asbestos, oil for example).
Carefully follow disposal instructions.
Do not treat concrete-asbestos surfaces with high
pressure jets. As it may cause the detachment of
dangerous asbestos fibres as well as dirt, detrimen -
tal to the lungs.
The risk exists particularly after the drying of a sur -
face treated with a water jet or steam.
Do not clean delicate components made of rubber,
fabric or similar materials with a multi-directional jet.
When cleaning with a high pressure, flat jet, keep
the nozzle at a minimum distance of 15 cm.
STARTING UP, OPERATIONAL ADVICE
The trigger of the spray gun must
function smoothly and return to initial
position, after release.
Check the functional conditions of the appliance
before the start of each operation.
The mains cable and the plug, the high pressure
pipe with spraying device and the safety devices
are particularly important.
Keep children and animals clear when the appliance
is operating.
Do not ever wash the appliance
or other electrical appliances
with a water jet. Short circuit
danger !
Water cleaners with the “Total Stop” device should
be considered as off when the omnipolar switch is
in the “O” position or the plug is unplugged from
the socket.
Please beware that when the Total Stop system is
active the device may look as though it has been
powered off, however, the machine is not totally
powered off until the mains switch has been turned to
off and/or the mains power plug has been detached.
Only put the appliance into operation providing that
all components are free of defects.
Firstly check the mains attachment wire, the high
pressure pipe, the spraying device and the body.
Do not tread on the high pressure pipe; do not pull,
bend or twist it. Do not shift the appliance by pulling
it by the high pressure pipe. Never operate with a
defective high pressure pipe, but always replace
with original spare. The high pressure pipe must be
homologated for the permitted working overpressure
of the appliance.
The functional overpressure and maximum tempera -
ture admitted, as well as the date of construction are
printed on the high pressure pipe covering.
WARNING: This machine was designed to be used
with the detergent recommended by the manufactu-
rer. The use of other detergents or chemical products
may compromise the safety of this machine.
Use only slightly alkaline detergents (Ph 9.1, 1%
solution), that are over 90% biodegradable.
As concerns water connection, refer to the regula-
tions of the individual countries. The constructor will
not accept liability for any damage to people, animals
or things as the result of improper, incorrect or un-
reasonable use, or use which does not comply with
the above indications. This device is not intended
for use by physically, sensorially or psychologically
impaired and/or disabled individuals (including all
children). It is also not intended for use by individuals
without any knowledge, experience or operation
skills on the device, unless said individuals haven’t
first been monitored by a person put in charge of
their safety and/or have been regularly instructed on
how to use the device correctly. Children must be
carefully monitored to ensure they do not play with
the device. Use only flexible hosing, accessories
and fittings recommended by the manufacturer. Do
not use the appliance in the event of any damage
to the power cable or other parts such as piping and
fitting. The machine must be handled and/or moved
ONLY with the appropriate handle (do not attempt
to move the machine by tugging on the tube and/or
on the power supply cable);
Before operating the machine, ensure that it is
standing very firmly on a flat, smooth and horizontal
surface.
The machine must be handled and/or moved ONLY
with the appropriate handle (do not attempt to move
the machine by tugging on the tube and/or on the
power supply cable);
Before operating the machine, ensure that it is
standing very firmly on a flat, smooth and horizontal
surface.
IMPORTANT : Use only original Spare Parts.