INTRODUCTION/GENERAL
WARNINGS/SAFETY
________________________________________________________________________________
p. 2 of 14
INTRODUCTION
This instruction manual is intended to serve as a guide and contains practical information on
operation, adjustment and maintenance of your new machine which has been designed and built to
ensure maximum performance, comfort and easy work in a wide variety of conditions. Before
delivery it has been checked at the factory and by our dealer to guarantee that it is delivered in
perfect condition. To maintain the machine in this condition and ensure problem-free operation, the
operations specified in this manual must be performed. Before using the machine, carefully read
this manual and always keep it within easy reach for further consultation. Any “left and right”
indications always refer to the direction of forward movement of the machine. If you require further
information on the machine, do not hesitate to contact our dealer who can provide skilled personnel,
original spare parts and all necessary equipment. The machine must not be used without protection.
For your safety, check that all the safety protections are closed or fitted correctly before starting the
machine.
GENERAL SAFETY PRECAUTIONS
The precautions listed below must be followed carefully to prevent injury to the operator or damage
to the machine.
•
Carefully read the labels on the machine, do not cover them for any reason and immediately
replace them if they become damaged.
•
Do not mix different types of detergents: harmful gases can be produced.
•
The storage temperature must be between 0°C and +55°C.
•
The optimal working temperature must be between 0°C and +40°C.
•
The humidity must be between 30% and 95%.
•
Do not use the machine in an explosive atmosphere.
•
Do not use the machine as a means of transport.
•
Do not use solutions that could damage the machine.
•
Avoid operation of the brushes with the machine at a standstill in order not to damage the
floor.
•
Do not suck up flammable liquids.
•
In the event of fire use a powder extinguisher. Do not use water.
•
Do not knock shelving or scaffolding where there is the danger of falling objects.
•
Adapt the operating speed to the floor adhesion conditions.
•
Avoid conditions of instability.
•
The machine must perform the cleaning and drying operations simultaneously. Any other
operations must be performed in areas that cannot be accessed by unauthorised personnel.
Mark wet floor areas with appropriate notices.
•
If machine operating faults are encountered, ensure that they are not due to lack of routine
maintenance. Call the authorised service centre if necessary.
•
When replacing parts, request original spares from a dealer and/or authorised retailer.
•
For all maintenance operations, disconnect the machine from the electrical power supply.
•
Do not remove protections that require the use of tools for removal.
•
Do not clean the machine with direct or pressurised jets of water or with corrosive
substances.
•
Every 200 hours have the machine checked by an authorised service centre.
•
This product is classified as RAEE type special waste and is covered by the requisites of the
new environmental protection regulations (2002/96/CE RAEE). It must be disposed of
separately from ordinary waste in compliance with current legislation and standards.
•
The machine does not produce harmful vibrations.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
