IPC Eagle CT160 700, Руководство по эксплуатации

Страница: 16 / 16

INTRODUCTION/GENERAL
WARNINGS/SAFETY
________________________________________________________________________________
p. 15 of 14
a- battery voltage is ≤ 29V a- charge the battery
a- battery voltage is
≤
27V a- check the battery levels and charge the battery
a- brushes are worn a- replace the brushes
b- the floor is very smooth and the electronic
doesn't read enough current consumption b- pass from P3 to P2 or P1: if already P1, use the
programming instruction to reduce the brushes pressure
a- parking brake is engage
a- unlock the brake by pushing the L shape lever near the
pedal
b- brake microswitch is wrong fixed b- check and eventually adjust the microswitch position
c- brake microswitch is broken c- replace the microswitch
a- recovery tank level sensor is engage by the
water level a- empty the recovery tank and reset the machine ( key
OFF/ON )
b- recovery tank level sensor is blocked in upper
position b- check the sensor and eventually replace it (code
MECI00516)
a- solution tank level sensor is engage by the
low water level a- expect to empty the recovery tank and fill the solution
tank
b- solution tank level sensor is blocked in lower
position b- check the sensor and eventually replace it (code
MECI00516)
a- is more than 5 minutes that the solution tank
level sensor is engage by the low water level a- empty the recovery tank and fill the solution tank and
reset the machine ( key OFF/ON )
b- is more than 5 minutes that the solution tank
level sensor is blocked in lower position b- check the sensor and eventually replace it (code
MECI00516)
a- replacement of the potentiometer
a- use the programming instruction to align the new
potentiometer
b- wrong ohm value in zero position
b- set to 0 Ω in zero position and follow the remedy "a" to
align it
8
BATTERY FLAT
OFF OFF
ON
brush head low
position
microswitch
inside the
actuator
9 BATTERIA ESAURITA OFF OFF
ON battery
OFF battery
ON
microswitch in the
parking brake
pedal
10 BRUSHES WORN
11 PARKING BRAKE ON ON
ON ON
12 RECOV.TANK LEVEL ON OFF
ON
level sensor
inside the solution
tank MECI00400
13 WATER RESERVE ON ON
ON
level sensor
inside the
recovery tank
ON
level sensor
inside the solution
tank MECI00400
OFF
accelerator pedal
potentiometer
14 NO WATER
15
POTENTIOMETER
ALIGNMENT
OFF OFF
OFF OFF
https://harrissupplyind.com - To Order Parts Call 608-268-8080