BEFORE OPERATING THE MACHINE
Read the manual carefully and completely before attempting to operate the unit. This manual has important
information for the use and safe operation of the machine. Keep this manual handy at all times. This
machine will assure years of satisfactory service if operated and maintained according to recommendations
in this manual. If additional information is needed, please contact your local distributor or write to:
IPC Eagle
3650 Dodd Rd
Eagan, MN 55123
WARNING
•
The machine was designed for use on carpet, floor and upholstery extraction applications as per
instructions and recommendations written in this manual. Any deviation from its proper use or
purpose and the consequential damage that may occur is the sole responsibility of the end user.
•
Disconnect the power cord from outlet before servicing. Do not leave machine connected to an
electrical outlet when unattended.
•
Do not immerse or use this machine in standing water. Such use may cause electric shock.
•
This equipment is not designed to handle or use combustible/volatile substances such as gasoline or
kerosene, in, on, or near the machine. The use of such materials will cause an extreme hazardous
condition.
•
When using an extension cord, use only a 3 conductor grounding cord - 14 ga. wire or heavier.
•
To avoid electric shock, do not expose the unit to rain - store it indoors only.
•
Do not use the machine for dry vacuuming.
•
Use defoamer at all times to prevent damage to the vacuum motor(s).
•
Do not use water in excess of 170°F (76°C).
•
To prevent seal damage and chemical build-up to the pump system, run clean water through the
solution lines after each day’s use.
•
Use only commercially available carpet cleaning solutions and defoamer intended for use with
machines of this type. Do not use dyes, bleaches, ammonia or other additives. The use of
powdered cleaning solution if not diluted properly may result in damage to the pump. If
powdered chemicals are used, premix in a separate container before placing in the solution tank.
•
Do not expose machine to freezing temperatures.
•
All repairs must be done by an authorized Eagle Power repair station.
• Do not use replacement parts other than those specified on the parts list.
FAILURE TO COMPLY WITH THE ABOVE WARNING INSTRUCTIONS WILL VOID THE
WARRANTY
GROUNDING INSTRUCTIONS
The 120 V. A/C and the 220 V. A/C models have been outfitted with the appropriate
grounded connectors. Make sure the machine is connected to a grounded outlet
having the same configuration as the grounded plug. No adapter should be used
with this machine. Any modification to the connectors will void the warranty.
Содержание BX2 Fastracts Extractor
Страница 5: ...Fastracts BX2 PARTS DIAGRAM ...
