IP-COM AP355, Руководство пользователя

Страница: 26 / 90

More Features
- 19 -
3.3 Network
This section consists of the following two parts:
LAN Setup : Display the AP's MAC address of LAN port, support to configure the AP's IP info, device name and
Ethernet Mode.
DHCP Server : Consist of DHCP Server and DHCP Client list.
3.3.1 LAN Setup
This section displays the AP's MAC address of LAN port and supports to configure the AP's IP info, device name
and Ethernet Mode.
Click Network to configure LAN parameters.
This AP supports two address modes, Static IP and Dynamic IP , to obtain an IP address.
Tip
1. If the AP's IP address has changed, you need to change your PC's IP address to one that is different from the AP
but on the same network segment, and re-log in to AP's UI with AP's new IP address.
2. By default, the AP's IP address is 192.168.0.254. It will be changed once managed by an AC successfully, and
you can log in to AC's UI to check it.
Static IP
In this address mode, you need to configure the IP info manually. And it applies to small-scale network, where
only several APs are deployed.
Configuration Steps :
1. Address Mode : Select Static IP .