Ip.Access nano3G AP Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 89

Ip.Access nano3G AP Скачать руководство пользователя страница 31

nano3G AP Installation Manual

Pre-Provisioning a nano3G AP

N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012

Page 25

23)

Click the drop-down lists to choose up to four NTP servers for the AP. The
available NTP servers are defined under Root > NOS > NTP Servers. At least one
NTP server must be selected.

24)

Click

Next

.

3.2.7

Modify NAS and Network Listen Settings

25)

The page for NAS and Network Listen details will appear:

The initial values on this page of the wizard are selected as follows:

• MCC and MNC: These are copied from the target AC. That is, the AC

associated with the parent AC Detail object. The RNC-Id is also copied, but
this is not shown in the wizard.

• SAI SAC and SAI LAC: If an existing AP, template or file was chosen, the

these values may have been automatically selected from one of these
sources.

• LAC RAC Candidate List and RF Parameters Candidate List: These are

under the Network Listen Control Package. If an existing AP, template or file
was chosen, the these values may have been automatically selected from
one of these sources.

In all cases, any changes on this page of the wizard will override any automatically
selected settings.

26)

If required, change the NAS entries. This is only necessary if the correct values
have not been selected automatically.

«
...
29
30
31
32
33
...
»

Содержание nano3G AP


























































































Отзывы:

Нет отзывов